DIO UF(ll) Fixture, Wide

DIO Product Catalog › Implant Systems › UFII Regular fixture

DIO official specifications

Bone Level UFII: Internal hex connection submerged implant system.

• Surface: HSA or VUV
• Recommended placement torque: less than 35 Ncm
• Shape: straight and tapered
• Internal hex 2.5

Source: DIO Implant official product information. Confirm the platform and size against your fixture before ordering.

DIO Implant · Bone Level UFII

UFII – Wide fixture

Internal hex connection submerged implant system.

• Surface: HSA or VUV
• Recommended placement torque: less than 35 Ncm
• Shape: straight & tapered

Internal hexSubmergedHSA / VUV

Select diameter and length with the options on this page.

UFII system overview

Compatible DIO components on WhiteCap

Official DIO abutments and screws for the UFII Regular / Wide platform. Driver and torque values from DIO.

Healing AbutmentUse 1.2 hex driver or 0.5 slot driver · Tightening torque 5–8 NcmView product ›Cover ScrewUse 1.2 hex driver · Tightening torque 5–8 NcmView product ›Temporary AbutmentUse 1.2 hex driver · N 20 Ncm / R 30–35 NcmView product ›Cemented AbutmentCRP / SCRP retained · 1.2 hex driver · N 20 Ncm / R 30–35 NcmView product ›Angled AbutmentCRP retained · 1.2 hex driver · N 20 Ncm / R 30–35 NcmView product ›Mill AbutmentCRP / SCRP retained · 1.2 hex driver · 30–35 NcmView product ›Solid AbutmentCRP retained · 1.2 hex or solid abutment driver · N 20 Ncm / R 30–35 NcmView product ›UCLA CCM Abutment1.2 hex driver · N 20 Ncm / R 30–35 NcmView product ›UCLA Plastic Abutment1.2 hex driver · 30–35 NcmView product ›Octa AbutmentOcta abutment driver · 30–35 NcmView product ›Multi-unit Straight AbutmentØ2.0 / Ø3.3 multi-unit straight driver · N 20 Ncm / R 30–35 NcmView product ›Multi-unit Angled AbutmentMulti-unit angled driver · N 20 Ncm / R 30–35 NcmView product ›Ball AbutmentBall abutment driver · N 20 Ncm / R 30–35 NcmView product ›Locator AbutmentOverdenture retained · N 20 Ncm / R 30–35 NcmView product ›Pre-Milled Bar1.2 hex driver · N 20 Ncm / R 30–35 NcmView product ›

Surgical kits for UFII

UF Wide KitView kit ›DIONAVI Wide Kit (guided)View kit ›UFII Master KitView kit ›UFII Prosthetic KitView kit ›

Compare all DIO surgical kits

Planning guided surgery?

DIO NAVI plans the UFII position from CT and scan data and delivers a surgical guide and drilling protocol as a Case in a Box.

See the DIO NAVI service and packages ›

Images and specifications: DIO Implant official UFII page. Confirm platform and size against your fixture before ordering.

UFII Implant

Hybrid Type SLA Implant

Open Thread By reducing the load while placing the fixture, it is possible to adjust the placement depth.  Upper Thread Taper, Thread, Initial Fixation The straight body is applied with a taper thread, which effectively disperses the load that is put on the top of the fixture. The depth of the thread becomes shallower as it goes to the top, and this can lessen the friction in the cortical bone area. Straight Body Decrement of Bone Damage The fixture size differs by the length in the body area, and a long fixture can be place stably like a straight-type fixture.  Taper Body Taper Guide radially Initial penetration is easier with the tapered area in the lower part of the fixture.

Platform Switching

The platform switching configuration enables a stable abutment connection.

Morse Tapered Contact Connection

There is coherence and even load distribution between the fixture and the abutment.

Cutting Edge

The efficiency of self-tapping can be increased with the sharp edge.

Apex

The gradually rounded shape can decrease the tissue damage when placing this in the maxillary.

The DIO UF (II) Fixture is a cutting edge implant, designed for perfection. With its open thread, it reduces the load while placing the fixture, adjusting the placement depth. By applying a tapered thread to the straight body, the stress applied to the upper part of the fixture is effectively dispersed. The thread depth decreases upwards, reducing friction on the cortical bone. The depth of the fixture is varied by changing the depth of the body part, and stable implantation is possible, like a straight type, in a fixture with a long depth. Even with weak bone quality, by applying a taper, the initial entry is easy, even when drilling is weak. Additionally, this product's platform switching configuration enables a stable abutment connection. It is also designed to decrease the tissue damage when placing it in the maxillary.