
Implant Air: precise, reliable, simple
A compact implant motor with an autoclavable Swiss electric motor, a 20:1 contra-angle on German bearings and automatic torque calibration at every power-on. Set it up in minutes and run every step from a 5-inch touchscreen or the multi-function foot pedal.
Built for stable torque, case after case
Every feature below comes from the U.S. specification: Swiss motor, German bearings and a sterilizable motor.

Automatic calibration
Torque calibrates itself every time the unit powers on, so there is no manual step before surgery.
- Shorter setup and fewer errors
- More accurate measurement and output

Stable torque output
When torque reaches the preset value, output is maintained instead of cutting off, helping you seat the implant at the target torque.
- Continuous output at the preset value
- Real-time torque on screen for primary stability

Swiss motor, German bearings
A lightweight 140 g Swiss electric motor drives the 20:1 contra-angle for up to 80 N·cm, with German bearings for durability and integrated LED for a clear view.
- Up to 80 N·cm at the implant
- Compatible with E-type contra-angles

Detachable, autoclavable motor
The contra-angle and motor separate for cleaning, and the U.S. motor can be autoclaved with its sealing plug fitted.
- Fit the sealing plug before autoclaving
- Let the motor cool fully before use

Multi-function foot pedal
Keep your hands in the field: the wired pedal handles the controls you change most during surgery.
- Irrigation flow and program switching
- Forward/reverse and variable speed

Quiet, waterproof pump
An ultra-quiet peristaltic pump with a waterproof design delivers up to 135 mL/min of sterile saline through disposable tubing to help prevent cross-infection.

Compact unit, 5-inch touchscreen
The upright 155 × 167 × 227 mm unit saves space on the cart. Five programs (Custom, Position, Drilling, Implant, Rinse) save their settings after every procedure.
- On-screen: direction, gear ratio, LED, irrigation level
Implant Air specifications
| Configuration | 5-inch LCD control unit, Swiss motor, 20:1 handpiece with German bearings, ultra-quiet peristaltic pump, multi-function foot controller |
|---|---|
| Power supply | AC 100–240 V, 50/60 Hz |
| Torque range | 5–80 N·cm (20:1) |
| Motor speed range | 300–42,000 rpm |
| Max. irrigation pump flow | 135 mL/min |
| Programs | 5 (Custom, Position, Drilling, Implant, Rinse) |
| On-screen options | Direction (FWD/REV), gear ratio, LED, irrigation level |
| Foot pedal (wired) | Irrigation flow, program, direction, variable speed |
| Motor | Swiss electric motor, 140 g, LED, autoclavable (U.S. version) |
| Contra-angle | 20:1 with German bearings and LED (1 included); E-type interface |
| Dimensions (W × D × H) | 155 × 167 × 227 mm |
Everything you need to start










Set up in 9 steps


Sterilization and care
- The U.S. motor is autoclavable.
- Always fit the sealing plug before autoclaving.
- Let the motor cool completely before using it again.
Warranty
- Control unit: 2 years
- Contra-angle and electric motor: 1 year
See Implant Air in use
Implant Air FAQ
What torque range does Implant Air deliver?
5 to 80 N·cm with the 20:1 contra-angle. Torque is shown on screen in real time and is held at the preset value once reached.
Can the motor be autoclaved?
Yes, the U.S. version motor is autoclavable. Fit the sealing plug first and let the motor cool fully before use.
Does it need manual calibration?
No. Implant Air calibrates its torque automatically every time it is powered on.
What speed should I use for implant placement?
Use the 20:1 contra-angle with sterile saline irrigation; the recommended maximum speed in implant placement mode is 2,000 rpm.
What does the foot pedal control?
Irrigation flow, program switching, forward/reverse direction and variable speed.
What is included?
Carrying case, control unit, Swiss electric motor, 20:1 contra-angle, foot pedal with stand, power cable, handpiece holder, 4 disposable saline tubes, tubing clips and spare fuses.
Related: Implant motors · Penguin RFA · AnyCheck stability tester · DIO surgical kits